- Free shipping
- 9% less
Your cart is empty
Subtotal:$0.00
HOLIDAY SAVINGS NOW!! INCREDIBLE SAVINGS WITH COUPON CODE
HOLIDAY2024
HOLIDAY SAVINGS ON RIGHT NOW!
Upgrade your Corvette C8 with our ZL1 Addons Side Skirt Extensions. Made to follow the same design cue's as GM's design team took with their overall design following the body lines and flow of the C8 mid-engine. Built using HDPE in 1/4" thickness, our side skirts are light and will not require heavy duty hardware to install. Proudly made in the USA, out kit includes Left and Right side skirt extension and the necessary hardware for installation. They will fit corvette's without factory O.E. rocker extensions and it is strongly encouraged to have a 2nd person help complete this install. Important note: these built to order and normally take between 7-10 business days to complete before shipping.
Important Installation notes: the front of the side skirt will install tight against the front inner fender padding while the rear will be able to be held in place with factory screws to assist in mounting. First begin by removing the 2 screws under the rocker panel in front of the rear tire and loosely mount the side skirt into position by placing those 2 removed screws back into place mounting the rear of the side skirts in place (leave loose for adjustments during install). Secondly, with the help of the 2nd person, align the front of the side skirt to the padded wheel well insert and then push the side skirt flat against the vehicle from front to back. Finally, insert the provided screws and place them into the pre-drilled holes. Our suggestion is to use the provided hardware; however, if you wish to rivet the side skirts to the vehicle, you can. If you do so, you will be required to drill through the fiberglass and aluminum frame.
Upgrade your Corvette C8 with our ZL1 Addons Side Skirt Extensions. Made to follow the same design cue's as GM's design team took with their overall design following the body lines and flow of the C8 mid-engine. Built using HDPE in 1/4" thickness, our side skirts are light and will not require heavy duty hardware to install. Proudly made in the USA, out kit includes Left and Right side skirt extension and the necessary hardware for installation. They will fit corvette's without factory O.E. rocker extensions and it is strongly encouraged to have a 2nd person help complete this install. Important note: these built to order and normally take between 7-10 business days to complete before shipping.
Important Installation notes: the front of the side skirt will install tight against the front inner fender padding while the rear will be able to be held in place with factory screws to assist in mounting. First begin by removing the 2 screws under the rocker panel in front of the rear tire and loosely mount the side skirt into position by placing those 2 removed screws back into place mounting the rear of the side skirts in place (leave loose for adjustments during install). Secondly, with the help of the 2nd person, align the front of the side skirt to the padded wheel well insert and then push the side skirt flat against the vehicle from front to back. Finally, insert the provided screws and place them into the pre-drilled holes. Our suggestion is to use the provided hardware; however, if you wish to rivet the side skirts to the vehicle, you can. If you do so, you will be required to drill through the fiberglass and aluminum frame.
Shipping
We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of SouthernCarParts. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.
Returns
Should you need to return a part for refund, exchange, or credit, please contact our returns department within 30 days of purchase at orders@southerncarparts.com for a Return Merchandise Authorization (RMA) number. Most problems, such as installation, can be solved with a telephone call (888-631-1433). Southern Car Parts will not accept returned goods without prior authorization and an RMA# written clearly on the exterior of the box. The customer is responsible for freight on all return orders. Parts authorized to be returned, on a non-exchange basis, are subject to a 20% restocking fee. Returns will only be accepted within 30 days of the original date of shipment. Custom painted parts - Once these parts are started, we can refund you less the paint(chemicals) that have been used. Exception is rear spoilers and front splitters, we can refund less 20%.
Custom-made-to-order items are NOT returnable. This includes embroidered floor mats, interior embroidered items, and car covers.
Damages in Shipping
All damages from shipping must be reported to Southern Car Parts within two business days from tracking number delivery confirmation. After two business days, damages become the responsibility of the customer.