- 9% less
Your cart is empty
0
items
Subtotal:$0.00
 |
Right Hand Chrome Replacement Front Bumper For 1963-1967 Corvette
SKU: CA-58635
CA 58635 Right Hand Chrome Replacement Front Bumper For 1963-1967 Chevrolet Corvette Base
CA Is Proud To Introduce Their Very First Replacement Bumpers For C2 Corvettes. These Quality Bumpers Feature A Beautiful Chrome Finish And High Quality Steel Construction. Every Effort Has Been Made To Replicate The OEM Design And Bracket Positioning, However Fitting May Be Required To Achieve Desired Fit To Your Specific Car. With Any Bumper, It Is Highly Recommended To Test Fit Prior To Completing Any Finishing Work On The Body. Holes In The Fiberglass Were Set By Using The Original Bumper As An Index, So Variances In Their Production Lead To Slight Variances In Hole Placement(s) On The Body During Production Cycles. Click On The "Instructions" Tab To See An Original AIM Sheet For Further Information.
C2 Front Bumper Installation Tips As Shared By Our Installers; 1) Begin Installation With The Front Inner Brackets Which Protrude From Below The Bumper Cover; 2) Slight Adjustments Of The Brackets May Be Necessary; 3) Only Install Each Bolt By A Few Threads So You Can Adjust The Fitment Before Final Tightening; 4) Remember To Install The Center Bar Before Tightening Any Hardware; 5) Tighten Hardware From The Center Of The Vehicle Outwards, With The Center Bar Being *Last*. Start At The Front Inner Brackets, Then Front Outer Brackets, Then Front Outer Bolt(s) Through Fiberglass, And Lastly The Center Bar.; Reference Attached Instruction Sheets for Torque Values
Steel
Chrome
Fitment: 1963, 1964, 1965, 1966, 1967 Chevrolet Corvette Base
CA 58635 Right Hand Chrome Replacement Front Bumper For 1963-1967 Chevrolet Corvette Base
CA Is Proud To Introduce Their Very First Replacement Bumpers For C2 Corvettes. These Quality Bumpers Feature A Beautiful Chrome Finish And High Quality Steel Construction. Every Effort Has Been Made To Replicate The OEM Design And Bracket Positioning, However Fitting May Be Required To Achieve Desired Fit To Your Specific Car. With Any Bumper, It Is Highly Recommended To Test Fit Prior To Completing Any Finishing Work On The Body. Holes In The Fiberglass Were Set By Using The Original Bumper As An Index, So Variances In Their Production Lead To Slight Variances In Hole Placement(s) On The Body During Production Cycles. Click On The "Instructions" Tab To See An Original AIM Sheet For Further Information.
C2 Front Bumper Installation Tips As Shared By Our Installers; 1) Begin Installation With The Front Inner Brackets Which Protrude From Below The Bumper Cover; 2) Slight Adjustments Of The Brackets May Be Necessary; 3) Only Install Each Bolt By A Few Threads So You Can Adjust The Fitment Before Final Tightening; 4) Remember To Install The Center Bar Before Tightening Any Hardware; 5) Tighten Hardware From The Center Of The Vehicle Outwards, With The Center Bar Being *Last*. Start At The Front Inner Brackets, Then Front Outer Brackets, Then Front Outer Bolt(s) Through Fiberglass, And Lastly The Center Bar.; Reference Attached Instruction Sheets for Torque Values
Steel
Chrome
Fitment: 1963, 1964, 1965, 1966, 1967 Chevrolet Corvette Base
- ManufacturerCA
- BrandCA
- Configurator StatusNo
- Covercraft StatusNo
- Disable loading on additional productsNo
- Disallow Use of CouponsNo
- MPNCA-58635
- Part Number_333224CA-58635
- Select FeaturedNo
Shipping
We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of SouthernCarParts. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.
Returns
Should you need to return a part for refund, exchange, or credit, please contact our returns department within 30 days of purchase at orders@southerncarparts.com for a Return Merchandise Authorization (RMA) number. Most problems, such as installation, can be solved with a telephone call (888-631-1433). Southern Car Parts will not accept returned goods without prior authorization and an RMA# written clearly on the exterior of the box. The customer is responsible for freight on all return orders. Parts authorized to be returned, on a non-exchange basis, are subject to a 20% restocking fee. Returns will only be accepted within 30 days of the original date of shipment. Custom painted parts - Once these parts are started, we can refund you less the paint(chemicals) that have been used. Exception is rear spoilers and front splitters, we can refund less 20%.
Custom-made-to-order items are NOT returnable. This includes embroidered floor mats, interior embroidered items, and car covers.
Damages in Shipping
All damages from shipping must be reported to Southern Car Parts within two business days from tracking number delivery confirmation. After two business days, damages become the responsibility of the customer.
Related products
