2008-2013 C6 Corvette Edelbrock 1591 Supercharger 599HP

Edelbrock for the C6 Corvette 2008-2013 (LS3 Engine, not for the Z06 or LS2 Engine).

This is the Edelbrock 599hp C6 Corvette LS3 Supercharger kit (Part number 1591) with the high flow fuel pump. The Edelbrock E-Force Street Legal C6 Corvette Supercharger Kit. Now you can boost the power in your LS3 C6 Corvette to near ZR1 performance! These new E-Force Supercharger Systems are exclusively tailored to boost your performance to 554 flywheel horsepower and 515 ft./lbs. of torque (with stock fuel pump) or 599 flywheel horsepower and 547 ft./lbs. of torque (includes high volume fuel pump). The E-Force Supercharger is an Eaton/Roots-style supercharger that mounts directly on top of the intake manifold. The unique features on these C6 Corvette Supercharger kits are the 12" long intake runners that allow for maximum low-end torque and the optional 5 years 100,000-mile supplemental warranty. Plus, the Edelbrock Supercharger kit fits under the stock hood with no modifications. It is not compatible with Z06 or ZR1 models. The Z06 Edelbrock Supercharger is located here, C6 Corvette Z06 Edelbrock Supercharger

Technical Note regarding Fuel Pump Installation: If you are considering the purchase of a complete C6 Corvette E-Force supercharger kit #1591(599HP) it is important to know that your new system includes an upgraded in-tank fuel pump, which is required to support the additional horsepower that the #1591 produces over the standard, 554HP kit, P/N: #1590. Installation of this pump is complex and not something we recommend for the do-it-yourselfer. Edelbrock strongly recommends that prior to beginning the install of a #1591 supercharger kit you take the vehicle to a Chevrolet dealership or experienced C6 Corvette repair facility for installation of this pump, per the specified GM workshop manual procedure. Once installed, you can follow these instructions to fully install the Edelbrock E-Force supercharger system.

Competitive systems often recommend or utilize voltage amplifiers for the purpose of increasing the output of the stock fuel pump. While these systems do work and will work in conjunction with the E-Force superchargers as well, Edelbrock does not endorse their use, as they can significantly reduce the life of the stock fuel pump, resulting in possible engine damage. Edelbrock strongly feels that the increased effort to install the upgraded, in-tank ZO6 fuel pump assembly, included in the #1591 kit, is the proper way to address the need for increased fuel volume.

* Will fit 2010-13 Grandsport Model. Grandsport models equipped with dry sump oil system may require additional hardware.

This is the 1591 C6 Corvette Supercharger E-Force Kit. The only difference between the 1590 and 1591 kit is that the 1591 Kit includes a different pulley and the high flow fuel pump which bumps up the horsepower to 599hp while the 1590 kit does not require the high flow fuel pump and offers HP of 554.

Free Shipping in the lower 48 states

Application: 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette