- Free shipping
- 9% less
Your cart is empty
0
items
Subtotal:$0.00
 |  | |
2015-2020 6.2L Charger/Challenger JLT Hellcat Cold Air Intake
SKU: jltCAI-HC-15
2015-2020 6.2L Charger/Challenger JLT Hellcat Cold Air Intake
This JLT kit from Southern Car Parts includes a fully Roto Molded airbox that uses the factory fresh air (Ram Air) inlet from the grille/headlight that also seals to the hood. We feel this is the key component that puts our kit well above the rest. Not only does this box help keep inlet air temps down by blocking the filter from hot engine heat, it also helps hold in the cool air getting rammed in from the inlet creating a high pressure area around the filter.
Speaking of the filter, our filter is a custom built design made by S&B. It has a built in bell mouth for super smooth and fast air flow as well as huge 1" deep pleats for more surface area than filters that look much bigger.
The intake tube is roto molded plastic with a huge 125mm for superior airflow and NO heat soak like metal tubes. With a mouth of 4.5" at the throttle body end, it is ready for any larger throttle bodies that may come in the future.
MAF and IAT adapter plates
2015/16 Hellcats have a Mass Air Flow sensor and 2017-2019 have an Inlet Air Temp sensor. We designed our kit to work with BOTH. Included in each kit are CNC machined aluminum plates, gasket and stainless screws to adapt to either model years.
Heat Shield
Includes new roto molded plastic heat shield to block engine heat at idle and low speed.
Rain Shields
Each kit comes with custom designed and water jet cut Lexan shields that bolt to the hood grille. Not only do they keep rain from the filter, they allow the cooler rammed air to stay in the box around the filter VS just being pushed out of the grille.
Features:
Incorporates fresh air inlet from the grill. Uses a large area to make sure the filter has tons of cool air.
Kit Includes:
- JLT Plastic Intake Tube
- Silicone Reducer
- 5x7 S&B Powerstack Air Filter
- Roto molded Heat Shield
- JLT MAF adaptor plate
- JLT IAT adaptor plate
- JLT Charger Rain Shield
- JLT Challenger Rain Shield
- HD Clamps, all needed hardware
- 2019 Hellcat PCV Kit
Not CARB Exempt!
Application: 2015, 2016, 2017, 2018, 2019, 2020 Dodge Charger/Challenger 6.2L Hellcat
- Free shipping
2015-2020 6.2L Charger/Challenger JLT Hellcat Cold Air Intake
This JLT kit from Southern Car Parts includes a fully Roto Molded airbox that uses the factory fresh air (Ram Air) inlet from the grille/headlight that also seals to the hood. We feel this is the key component that puts our kit well above the rest. Not only does this box help keep inlet air temps down by blocking the filter from hot engine heat, it also helps hold in the cool air getting rammed in from the inlet creating a high pressure area around the filter.
Speaking of the filter, our filter is a custom built design made by S&B. It has a built in bell mouth for super smooth and fast air flow as well as huge 1" deep pleats for more surface area than filters that look much bigger.
The intake tube is roto molded plastic with a huge 125mm for superior airflow and NO heat soak like metal tubes. With a mouth of 4.5" at the throttle body end, it is ready for any larger throttle bodies that may come in the future.
MAF and IAT adapter plates
2015/16 Hellcats have a Mass Air Flow sensor and 2017-2019 have an Inlet Air Temp sensor. We designed our kit to work with BOTH. Included in each kit are CNC machined aluminum plates, gasket and stainless screws to adapt to either model years.
Heat Shield
Includes new roto molded plastic heat shield to block engine heat at idle and low speed.
Rain Shields
Each kit comes with custom designed and water jet cut Lexan shields that bolt to the hood grille. Not only do they keep rain from the filter, they allow the cooler rammed air to stay in the box around the filter VS just being pushed out of the grille.
Features:
Incorporates fresh air inlet from the grill. Uses a large area to make sure the filter has tons of cool air.
Kit Includes:
- JLT Plastic Intake Tube
- Silicone Reducer
- 5x7 S&B Powerstack Air Filter
- Roto molded Heat Shield
- JLT MAF adaptor plate
- JLT IAT adaptor plate
- JLT Charger Rain Shield
- JLT Challenger Rain Shield
- HD Clamps, all needed hardware
- 2019 Hellcat PCV Kit
Not CARB Exempt!
Application: 2015, 2016, 2017, 2018, 2019, 2020 Dodge Charger/Challenger 6.2L Hellcat
- ManufacturerJLT
- Configurator StatusNo
- Covercraft StatusNo
- Disable loading on additional productsNo
- Disallow Use of CouponsNo
- MPNjltCAI-HC-15
- Part Number_333224jltCAI-HC-15
- Select FeaturedNo
- Choose Filter ColorRed Oiled, Blue Oiled, White Dry
Shipping
We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of SouthernCarParts. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.
Returns
Should you need to return a part for refund, exchange, or credit, please contact our returns department within 30 days of purchase at orders@southerncarparts.com for a Return Merchandise Authorization (RMA) number. Most problems, such as installation, can be solved with a telephone call (888-631-1433). Southern Car Parts will not accept returned goods without prior authorization and an RMA# written clearly on the exterior of the box. The customer is responsible for freight on all return orders. Parts authorized to be returned, on a non-exchange basis, are subject to a 20% restocking fee. Returns will only be accepted within 30 days of the original date of shipment. Custom painted parts - Once these parts are started, we can refund you less the paint(chemicals) that have been used. Exception is rear spoilers and front splitters, we can refund less 20%.
Custom-made-to-order items are NOT returnable. This includes embroidered floor mats, interior embroidered items, and car covers.
Damages in Shipping
All damages from shipping must be reported to Southern Car Parts within two business days from tracking number delivery confirmation. After two business days, damages become the responsibility of the customer.
Customers who bought this product also bought
Related products
