2007-08 Infiniti G35 Sedan - Dual Ultra Long Tube Air Intake Kit [Gen 3] - Oil Filter - 402849

Compare

2007-08 Infiniti G35 Sedan - Dual Ultra Long Tube Air Intake Kit [Gen 3] - Oil Filter - 402849

SKU: STIL-402849

Air Intake System by Stillen

Stillen Automotive Parts specializes in performance upgrades for cars and trucks, offering products such as exhaust systems, superchargers, brakes, and body kits. Known for enhancing vehicle power, handling, and aesthetics, Stillen caters to enthusiasts looking to improve their vehicle’s performance on both the street and track.

2007-2008 Infiniti G35 Sedan Stillen 402849 Air Intake System

Product Features

Ultra Long Mandrel Bent Polished Aluminum Intake Tubes
Do Not Use Oil and Provide Low Restriction
Increased Throttle Performance and Horsepower
High Quality Washable Oiled Filter
Easy to Clean with million mile warranty
CARB Exempt - E.O. #D-436-21

Infiniti G35 Air Intake - Sedan (Gen 3) Dual Ultra Long Tube [VQ35] - Oil Filter - 402849

BENEFITS:

Improved Acceleration with 14WHP / 8WTQ Peak Gain to the wheels*
Improved low end torque
Built To Last - Designed & Manufactured in U.S.A.
Large Surface Area Air Filters, Efficient Filter Media & Airflow Improve Miles per gallon (MPG).
Improved throttle response
Increased Power and Torque Across Entire Rev Band
Simple Installation - Easy Enough to Do In Your Driveway!
Improves Underhood Engine Bay Appearance.
Runs Great on Stock Tune - No CEL, No Tune Needed!

*Results May Vary!

Increase engine performance with the STILLEN air intake for Infiniti G35 V35. The GEN 3 features the most optimal horsepower and torque gains. This STILLEN Infiniti G35 air intake has a polished finish. This V35 G35 intake provides a better air flow to the engine with the smooth surface tubing construction.

STILLEN offers our exclusive Generation 3 Ultra Long Tube Intake for the dual throttle body VQ engines.

At STILLEN, good is never good enough. While the naysayers said that making HP from the HR with an intake was impossible, we were determined to prove otherwise. Our continuing dedication to extracting maximum performance from the VQ35HR powerplant led to the introduction of our new Generation 3 Ultra Long Tube Cold Air Intake Kit for VQ35HR equipped vehicles.

Our R&D team engineered and dyno tested more than 50 variations before identifying this design as the best solution available for the VQ35HR engine.

The Gen 3 intake has a radically updated design that provides dramatically better power than any intake on the market for the VQ35HR equipped G35 models. It features an integrated system of variable diameter tubing and steps to maximize air velocity, including additional polished tubes that pass through the front core support.

TWO FILTERS ARE BETTER THAN ONE

The new Ultra Long Tube Cold Air Intake places two large air filters in front of the radiator. This strategic placement of the filters allow for optimum cold air flow and easy filter access and removal for cleaning. On some applications such as the G35, urethane splash guards are included in the kit to help protect the filters.

Since 1986 STILLEN has been recognized as a leader in the high performance automotive industry. Founded by multi-time World Champion racing driver Steve Millen our company has always been focused on achieving the best performance possible while manufacturing all of our products in America. STILLEN is comprised of a team of enthusiasts with decades of experience tuning, enhancing, and overall improving road cars to be superior in every way. With in-house manufacturing capabilities for poly-urethane injection manufacturing, metal fabrication and a full CNC machine shop STILLEN is able to produce all products in house to our very strict quality control standards.

Being a manufacturing and engineering company we are able to see the quality of the products made by our partner vendors. We select every partner vendor based on many factors but none more important than the quality of their products and Customer Service. These two factors are the most important for STILLEN when it comes to offering our vendor partners products to our valued customers. Because we manufacture such a wide range of products we have the experience required to know what is happening with another manufacturer’s products and to know whether or not it is a product we can believe in.

With all of the manufacturers we offer STILLEN works extremely hard to develop and maintain excellent relationships with these manufacturers to ensure our customers have the best experience possible. Whether you are purchasing a STILLEN manufactured product or a part offered by one of our dozens of vendor partners we can guarantee that STILLEN is able to provide the best service possible from fast shipping, to any product support that might arise.

Steve Millen has won championships around the world in many different disciplines of auto racing. From rally cars, to single seaters, and offroad trucks to the highest level of sports car racing (IMSA) Steve has won championships in every category and still holds records for most wins and most pole positions. He is also the only driver in history to win the 24 hours of Daytona, 12 hours of Sebring and 24 hours of Le Mans in the same year. This level of skill and racing prowess drives our entire team every day to be the best in the business.

Fitment: 2007-2008 Infiniti G35 Sedan

- SKU
  STIL-402849
- Weight
  13 lbs
- Dimensions (L x W x H)
  20 x 13 x 13 in
- Manufacturer Part #
  402849
Manufacturer
Stillen
Brand
Stillen
MPN
402849
Part Number_333224
402849
Part Number
402849
Brand Name
Stillen
Vendor
Stillen

There are no comments yet. Be the first to leave a comment

Shipping

We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of SouthernCarParts. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.

Returns

Should you need to return a part for refund, exchange, or credit, please contact our returns department within 30 days of purchase at orders@southerncarparts.com for a Return Merchandise Authorization (RMA) number. Most problems, such as installation, can be solved with a telephone call (888-631-1433). Southern Car Parts will not accept returned goods without prior authorization and an RMA# written clearly on the exterior of the box. The customer is responsible for freight on all return orders. Parts authorized to be returned, on a non-exchange basis, are subject to a 20% restocking fee. Returns will only be accepted within 30 days of the original date of shipment. Custom painted parts - Once these parts are started, we can refund you less the paint(chemicals) that have been used. Exception is rear spoilers and front splitters, we can refund less 20%.

Custom-made-to-order items are NOT returnable. This includes embroidered floor mats, interior embroidered items, and car covers.
Damages in Shipping

All damages from shipping must be reported to Southern Car Parts within two business days from tracking number delivery confirmation. After two business days, damages become the responsibility of the customer.

HOLIDAY2024

Painted Parts are painted to order and take additional time, right now we are about a 6-8 week lead time. Please keep this in mind.

Your cart is empty